Shop – Penley Golf Shafts https://penleysports.com Made In The USA – Fitted To You Sun, 11 May 2025 05:33:10 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.1 https://penleysports.com/wp-content/uploads/2023/04/cropped-favicon-32x32.jpg Shop – Penley Golf Shafts https://penleysports.com 32 32 R2P Legends – Penley ETA Wood 75 R Flex https://penleysports.com/product/r2p-legends-penley-eta-wood-75-r-flex/ https://penleysports.com/product/r2p-legends-penley-eta-wood-75-r-flex/#respond Thu, 29 Jun 2023 22:18:38 +0000 https://penleysports.o4sdesign.com/?post_type=product&p=80916 Upgrading your shaft has never been easier. Penley ‘Ready2Play’ – Shafts with Adjustable Adapter Sleeves – Professionally installed by Penley here in our factory. Ready for the course when you receive it from us. All Penley ‘R2P’ Legends shafts come with:
  • Original Penley ETA Shaft in an R flex with proper spine alignment
  • Adjustable Adapter Sleeve accurately aligned, installed and bonded
  • Choice of  signature logo Penley Pure Grip (color options in drop-down)
  • FREE SHIPPING
*Due to the limited availability of the Legends Series Penley Shafts, these shafts are final sale and cannot be returned. **These shafts are .350 tip, but is compatible with the driver model. If you decide to switch to a different model of club, please check if there is an adjustable sleeve has a .350 tip hosel. If you are looking for a shaft that is compatible with the ETA from our current line, please view our ET2 Pro Series shaft or our QUASAR ET3 shaft.]]> The ETA (Energy Transfer Accelerance) shaft was designed to increase and maximize the transfer of energy of the shaft from the butt to tip end. Using hybrid proprietary materials combined with proper geometric shape and designed with TBAR.

The ETA’s tip section has an extremely high rate of recovery due to specific materials which causes it to have a high launch angle with a low spin rate. ETA means achieving more energy at impact which translates into more distance.

 

ETA R Shaft Unique Shaft Specifications

SHAFT TYPE FLEX KICK POINT WEIGHT TORQUE LENGTH TIP BUTT SWING SPEED TRIM SPECS
ETA 75 WOOD R MID-HIGH 78 4.0 47″ 0.350 0.600 80-95 Butt Trim to playing length only.

 

Flex: R

Tip Diameter: .350

Adjustable Sleeve Options:

 

  • CALLAWAY Epic/Rogue/XR/GBB – compatible with: Callaway OptiForce 440, OptiForce 460, 2014 Big Bertha, Big Bertha Alpha (both 815 and 816 models), X2 Hot, X2 Hot Pro, 2014 V Series, XR Series, XR 16 Series, Callaway Epic, Epic Sub Zero, Epic Flash, Epic Flash Sub Zero & MAVRIK line of drivers
  • COBRA Universal Adjustable Sleeve for the Cobra driver (compatible with: COBRA KING SZ, F9, F8, F8+, F7, F7+, KING LTD, F6, F6+, FLY-Z, FLY-Z+, BiO CELL AND BiO CELL+ DRIVERS)
  • PING G/ G30/ G400 (compatible with PING: G SERIES, G30 & G400 DRIVERS & WOODS)
  • TAYLORMADE M/R15/ SLDR/RBZ Stage 2/Jetspeed – 2 degree Adjustable Sleeve compatible with: M1, M2, M3,M4, M5, M6 as well as SLDR, RBZ Stage 2 JETSPEED & ADAMS XTD Ti
  • TITLEIST TS/917/915/913/910  – Adjustable Sleeve compatible with the Titleist TS1, TS2, TS3, TS4, 917, 915, 913, 910 D2 D3 Drivers
  • TAYLORMADE RBZ Stage 2– 1.5 degree Adjustable Sleeve with .335 tip (fits SLDR, JETSPEED, and ADAMS XTD Ti. Also fits R1)
]]> https://penleysports.com/product/r2p-legends-penley-eta-wood-75-r-flex/feed/ 0 Executive Player Iron Shaft https://penleysports.com/product/executive-player-iron-shaft/ https://penleysports.com/product/executive-player-iron-shaft/#respond Wed, 03 May 2023 20:30:42 +0000 https://penleysports.o4sdesign.com/?post_type=product&p=74638 SMOOTH CONSISTENT FEEL.
EP IRON DESIGN DRIVERS
Part of the Graphite Light Family (GL2) Series, the Executive Player Irons are designed primarily for the higher handicap player who has a slower transition/swing speed, yet wants to gain distance and accuracy. Penley’s new and unique advanced fiber pattern design/manufacturing process redirects the flex stiffness and the torque resistance modes to actually complement each other. The results for the player is a shaft that has a smooth buttery feel through out the swing plane yet delivering a solid square impact at ball contact.]]> PENLEY EXECUTIVE PLAYER IRONS
SHAFT SPECS
EP IRON SHAFT SPECS
FLEX WEIGHT LENGTH TIP DIA. BUTT DIA. TORQUE TBAR MATCHED
A 68g 40.5″ 0.370″ 0.610″ 4.4 YES
R 70g 40.5″ 0.370″ 0.610″ 4.3 YES
S 75g 40.5″ 0.370″ 0.610″ 4.2 YES

 

Ball Flight: Mid

Kick Point: Mid

WHO SHOULD PURCHASE THE EP IRON?

The Executive Player Irons are designed primarily for the higher handicap player who has a slower transition/swing speed, yet wants to gain distance and accuracy.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

Suggested Flex Selection by Swing Speed:

A – Generally 80-95 mph. – slower tempo

R – Generally 80-95 mph. – slow tempo

S – Generally 96-105 mph. – mid tempo

 

Penley suggests that you consult a Professional Club fitter or Contact Us– We will be happy to help answer any questions you may have.

MADE IN THE USA

Our shafts are designed, manufactured and built right here in San Diego, California. Carter Penley designs and oversees all manufacturing of Penley Shafts. You can be assured that each shaft designed by Carter Penley will always be the best, most consistent quality shaft you will ever purchase.

 

OUR TECHNOLOGY

TBAR™ (Tip to Butt Aspect Ratio) is a proprietary manufacturing process developed by Penley that produces the tightest most exacting tolerances from model to model, flex to flex, shaft to shaft.

Zone Flex™ Characterization – is another process developed by Penley utilizing the TBAR™ algorithm that simplifies fitting a player. These customized Zone Flexes are performance matched to an individual players’ needs.

The TBAR™ algorithm, combined with our Zone Flex™ Characterization results in a shaft that is tuned to fit the player, not the player having to fit the shaft- giving the player greater versatility and customization and is built into every one of our shaft models.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

For those that need a a different, more specific tuned shaft for their needs (such as higher/lower launch), review the Zone Flex Characterization Chart or click on the image below to fill out our online fitting form:

]]> https://penleysports.com/product/executive-player-iron-shaft/feed/ 0 Executive Player Wood Shaft https://penleysports.com/product/executive-player-wood-shaft/ https://penleysports.com/product/executive-player-wood-shaft/#respond Wed, 03 May 2023 20:21:39 +0000 https://penleysports.o4sdesign.com/?post_type=product&p=74631 SMOOTH CONSISTENT FEEL.
EXECUTIVE PLAYER WOOD DESIGN DRIVERS
Part of the Graphite Light Family (GL2) Series, the Executive Player Wood is designed primarily for the higher handicap player who has a slower transition/swing speed, yet wants to gain distance and accuracy. Penley’s new and unique advanced fiber pattern design/manufacturing process redirects the flex stiffness and the torque resistance modes to actually complement each other. The results for the player is a shaft that has a smooth buttery feel through out the swing plane yet delivering a solid square impact at ball contact.]]> PENLEY EXECUTIVE PLAYER WOOD
SHAFT SPECS
EP WOOD SHAFT SPECS
FLEX WEIGHT LENGTH TIP DIA. BUTT DIA. TORQUE TBAR MATCHED
A 66g 45″ 0.335″ 0.610″ 4.5 YES
R 68g 45″ 0.335″ 0.610″ 4.4 YES
S 70g 45″ 0.335″ 0.610″ 4.3 YES

Ball Flight: Mid

Kick Point: Mid

WHO SHOULD PURCHASE THE EP WOOD?

The Executive Player Wood is designed primarily for the higher handicap player who has a slower transition/swing speed, yet wants to gain distance and accuracy.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

Suggested Flex Selection by Swing Speed:

A – Generally 70-80 mph. – slower tempo

R – Generally 80-95 mph. – slow tempo

S – Generally 96-105 mph. – mid tempo

 

Penley suggests that you consult a Professional Club fitter or Contact Us– We will be happy to help answer any questions you may have.

MADE IN THE USA

Our shafts are designed, manufactured and built right here in San Diego, California. Carter Penley designs and oversees all manufacturing of Penley Shafts. You can be assured that each shaft designed by Carter Penley will always be the best, most consistent quality shaft you will ever purchase.

 

OUR TECHNOLOGY

TBAR™ (Tip to Butt Aspect Ratio) is a proprietary manufacturing process developed by Penley that produces the tightest most exacting tolerances from model to model, flex to flex, shaft to shaft.

Zone Flex™ Characterization – is another process developed by Penley utilizing the TBAR™ algorithm that simplifies fitting a player. These customized Zone Flexes are performance matched to an individual players’ needs.

The TBAR™ algorithm, combined with our Zone Flex™ Characterization results in a shaft that is tuned to fit the player, not the player having to fit the shaft- giving the player greater versatility and customization and is built into every one of our shaft models.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

For those that need a a different, more specific tuned shaft for their needs (such as higher/lower launch), review the Zone Flex Characterization Chart or click on the image below to fill out our online fitting form:

]]> https://penleysports.com/product/executive-player-wood-shaft/feed/ 0 Hybrid Heater2 Shaft https://penleysports.com/product/hybrid-heater2-shaft/ https://penleysports.com/product/hybrid-heater2-shaft/#respond Wed, 03 May 2023 20:04:00 +0000 https://penleysports.o4sdesign.com/?post_type=product&p=74621
HH2 DESIGN DRIVERS
Ball trajectory is vital. A high trajectory (ballooning) leaves the player short, and a low (flat) trajectory gives the player too much roll, overshooting the green. The better ball strike is one that launches the ball a few degrees higher than the loft of the head and carries 80% of the distance to the target and then drops at a 50 to 55 degree angle to the target surface with virtually a soft impact and very little roll, allowing the player to achieve their desired distance with accuracy and confidence with every strike.
The Hybrid Heater 2 is approved and available as a Custom Order upgrade through Nike Golf, and approved by several OEM’s custom upgrade for Tour and consumers. nike_logo ]]> PENLEY HYBRID HEATER 2 Pro Series
HYBRID HEATER2 DESIGN THEORY:
  • Increase shaft weight over original 80 gram model
  • Higher kick point to keep the ball from ballooning to accommodate USGA groove rules
  • Incorporate “Tip to Butt Aspect Ratio” (TBAR) to stabilize shaft integrity for maximum accuracy and “FEEL”.

The Hybrid Heater 2 takes the original Hybrid Heater to the next level and allows the player to achieve their desired distance with accuracy and confidence with every strike. Penley shafts are designed to improve the players ball striking ability.

SHAFT SPECS
HYBRID HEATER 2 SHAFT SPECS
FLEX WEIGHT LENGTH TIP DIA. BUTT DIA. TORQUE TBAR MATCHED
R 90g 41.5″ 0.370″ 0.600″ 2.5 YES
S 90g 41.5″ 0.370″ 0.605″ 2.5 YES
X 90g 41.5″ 0.370″ 0.605″ 2.5 YES

 

Kick (Bend) Point: Mid/High

Ball Flight: Mid/Low

WHO SHOULD PURCHASE THE HH2?

A player that is looking for a standalone hybrid shaft and who is endeavoring to improve their ball striking ability, carrying distance and accuracy.

The Hybrid Heater2 was developed with a higher kick point to keep the ball from ballooning to accommodate USGA groove rules. If you want a hybrid shaft that gives you the best ball trajectory and avoiding ballooning or overshooting the green, then the Hybrid Heater2 is for you.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

Suggested Flex Selection by Swing Speed:

R – Generally 80-95 mph. – slower tempo

S – Generally 96-105 mph. – mid tempo

X – Generally 106-115 mph. – fast tempo

Still not sure? Contact Us. We will be happy to help answer any questions you may have.

MADE IN THE USA

Our shafts are designed, manufactured and built right here in San Diego, California. Carter Penley designs and oversees all manufacturing of Penley Shafts. You can be assured that each shaft designed by Carter Penley will always be the best, most consistent quality shaft you will ever purchase.

 

OUR TECHNOLOGY

TBAR™ (Tip to Butt Aspect Ratio) is a proprietary manufacturing process developed by Penley that produces the tightest most exacting tolerances from model to model, flex to flex, shaft to shaft.

Zone Flex™ Characterization – is another process developed by Penley utilizing the TBAR™ algorithm that simplifies fitting a player. These customized Zone Flexes are performance matched to an individual players’ needs.

The TBAR™ algorithm, combined with our Zone Flex™ Characterization results in a shaft that is tuned to fit the player, not the player having to fit the shaft- giving the player greater versatility and customization and is built into every one of our shaft models.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

For those that need a a different, more specific tuned shaft for their needs (such as higher/lower launch), review the Zone Flex Characterization Chart or click on the image below to fill out our online fitting form:

]]> https://penleysports.com/product/hybrid-heater2-shaft/feed/ 0 Platinum Fairway Wood Shaft https://penleysports.com/product/platinum-fairway-wood-shaft/ https://penleysports.com/product/platinum-fairway-wood-shaft/#respond Wed, 03 May 2023 19:29:39 +0000 https://penleysports.o4sdesign.com/?post_type=product&p=74612 THE PERFECT CATALYST FOR YOUR GAME.
PLATINUM FAIRWAY DESIGN DRIVERS
The Penley Fairway Wood, also known as the ‘Platinum’ or the ‘Pt2’, is a standalone Fairway wood shaft- not a wood driver that is cut down. Each model is a unique design of its own with different mechanical and physical properties beyond a cut down driver. The Platinum Fairway wood comes in 3, 5 or 7 wood.]]> PENLEY PLATINUM FAIRWAY WOOD SHAFT
SHAFT SPECS
PENLEY Pt2 FAIRWAY WOOD SHAFT SPECS
FLEX WEIGHT LENGTH TIP DIA. BUTT DIA. TORQUE TBAR*
3W R 87g 44″ 0.335″ 0.595″ 3.7 7.3/4.3
5W R 85g 43″ 0.335″ 0.595″ 3.7 7.3/4.3
7W R 83g 42″ 0.335″ 0.595″ 3.7 7.3/4.3
3W S 89g 44″ 0.335″ 0.595″ 3.5 8.2/5.0
5W S 87g 43″ 0.335″ 0.595″ 3.5 8.2/5.0
7W S 85g 42″ 0.335″ 0.595″ 3.5 8.2/5.0
3W X 90g 44″ 0.335″ 0.600″ 3.3 9.0/5.4
5W X 88g 43″ 0.335″ 0.600″ 3.3 9.0/5.4
7W X 87g 42″ 0.335″ 0.600″ 3.3 9.0/5.4

 

Kick (Bend) Point: Mid

Ball Flight: Mid

WHO SHOULD PURCHASE THE PENLEY FAIRWAY WOOD?

A player that is looking for Tour Quality, stand-alone fairway to replace their 3, 5 or 7 wood. The Platinum Fairway woods are designed as a ‘true’ fairways- not a driver cut down to a fairway. Each model is a unique design of its own with different mechanical and physical properties beyond a cut down driver.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

Suggested Flex Selection by Swing Speed:

R – Generally 80-95 mph. – slower tempo

S – Generally 96-105 mph. – mid tempo

X – Generally 106-115 mph. – fast tempo

Penley suggest that you consult a Professional Club fitter.

Still have questions? Contact Us– We will be happy to help answer any questions you may have.

MADE IN THE USA

Our shafts are designed, manufactured and built right here in San Diego, California. Carter Penley designs and oversees all manufacturing of Penley Shafts. You can be assured that each shaft designed by Carter Penley will always be the best, most consistent quality shaft you will ever purchase.

 

OUR TECHNOLOGY

TBAR™ (Tip to Butt Aspect Ratio) is a proprietary manufacturing process developed by Penley that produces the tightest most exacting tolerances from model to model, flex to flex, shaft to shaft.

Zone Flex™ Characterization – is another process developed by Penley utilizing the TBAR™ algorithm that simplifies fitting a player. These customized Zone Flexes are performance matched to an individual players’ needs.

The TBAR™ algorithm, combined with our Zone Flex™ Characterization results in a shaft that is tuned to fit the player, not the player having to fit the shaft- giving the player greater versatility and customization and is built into every one of our shaft models.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

For those that need a a different, more specific tuned shaft for their needs (such as higher/lower launch), review the Zone Flex Characterization Chart or click on the image below to fill out our online fitting form:

]]> https://penleysports.com/product/platinum-fairway-wood-shaft/feed/ 0 Executive Player Iron Set https://penleysports.com/product/executive-player-iron-set/ https://penleysports.com/product/executive-player-iron-set/#respond Thu, 27 Apr 2023 01:41:19 +0000 https://penleysports.o4sdesign.com/?post_type=product&p=26908 SMOOTH CONSISTENT FEEL.
EP IRON DESIGN DRIVERS
Part of the Graphite Light Family (GL2) Series, the Executive Player Irons are designed primarily for the higher handicap player who has a slower transition/swing speed, yet wants to gain distance and accuracy. Penley’s new and unique advanced fiber pattern design/manufacturing process redirects the flex stiffness and the torque resistance modes to actually complement each other. The results for the player is a shaft that has a smooth buttery feel through out the swing plane yet delivering a solid square impact at ball contact.]]> PENLEY EXECUTIVE PLAYER IRONS
SHAFT SPECS
EP IRON SHAFT SPECS
FLEX WEIGHT LENGTH TIP DIA. BUTT DIA. TORQUE TBAR MATCHED
A 68g 40.5″ 0.370″ 0.610″ 4.4 YES
R 70g 40.5″ 0.370″ 0.610″ 4.3 YES
S 75g 40.5″ 0.370″ 0.610″ 4.2 YES

Ball Flight: Mid

Kick Point: Mid

WHO SHOULD PURCHASE THE EXECUTIVE PLAYER IRON SET?

The Executive Player Irons are designed primarily for the higher handicap player who has a slower transition/swing speed, yet wants to gain distance and accuracy. The EP Iron Set is TBAR matched and for players that are looking to upgrade to a better quality, consistent iron shaft set. The set consists of 3-PW or 4-GW.

OPTIONS:
The Executive Player Irons are parallel, but are not stocked ‘taper–tipped‘. If you need them taper–tipped, this can be done here at our plant. This is a special order and is $10.00 USD for each shaft.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

Suggested Flex Selection by Swing Speed:

A (Amateur/Senior Flex)- Generally 80-95 mph. – slower tempo

R (Regular Flex)- Generally 80-95 mph. – slow tempo

S (Stiff Flex)- Generally 96-105 mph. – mid tempo

Penley suggests that you consult a Professional Club fitter or Contact Us– We will be happy to help answer any questions you may have.

MADE IN THE USA

Our shafts are designed, manufactured and built right here in San Diego, California. Carter Penley designs and oversees all manufacturing of Penley Shafts. You can be assured that each shaft designed by Carter Penley will always be the best, most consistent quality shaft you will ever purchase.

 

OUR TECHNOLOGY

TBAR™ (Tip to Butt Aspect Ratio) is a proprietary manufacturing process developed by Penley that produces the tightest most exacting tolerances from model to model, flex to flex, shaft to shaft.

Zone Flex™ Characterization – is another process developed by Penley utilizing the TBAR™ algorithm that simplifies fitting a player. These customized Zone Flexes are performance matched to an individual players’ needs.

The TBAR™ algorithm, combined with our Zone Flex™ Characterization results in a shaft that is tuned to fit the player, not the player having to fit the shaft- giving the player greater versatility and customization and is built into every one of our shaft models.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

For those that need a a different, more specific tuned shaft for their needs (such as higher/lower launch), review the Zone Flex Characterization Chart or click on the image below to fill out our online fitting form:

Options: Taper Tipping

]]> https://penleysports.com/product/executive-player-iron-set/feed/ 0 Penley STEALTH Shaft https://penleysports.com/product/penley-stealth-shaft/ https://penleysports.com/product/penley-stealth-shaft/#respond Thu, 27 Apr 2023 01:06:00 +0000 https://penleysports.o4sdesign.com/?post_type=product&p=21974 BACK BY POPULAR DEMAND. One of our most popular shaft models is making a comeback. Originally developed for the better player, the Stealth gained traction with not just tour players, but players of all abilities saw an improved performance. The newly redesigned Penley STEALTH model keeps the same characteristics that the original Stealth design had, with the following improvements:
  • Redesigned for improved performance with the latest materials and processes
  • Designed with a firm butt which promotes better stability and control, and a stable, but reactive tip section that gives the player just the right amount of stiffness for feel and feedback.
  • Designed into the new STEALTH model is TBAR™ and ZONE FLEX™ Characterization – a proprietary process that no other shaft company practices and is built into every shaft model – giving players of all abilities improved performance based on the players individual needs.
The new STEALTH is available as a READY2PLAY option View the Penley STEALTH Specifications]]> PENLEY STEALTH
SHAFT SPECS
STEALTH SHAFT SPECS
FLEX  WEIGHT  LENGTH  TIP DIA.  BUTT DIA. TORQUE
 TBAR
R 71g 46 0.335 0.600 4.0 7.2/3.8
S 73g 46 0.335 0.600 3.8 8.1/4.5
X 74g 46 0.335 0.600 3.6 8.8/5.2

Launch: Mid Launch

Trajectory: Mid

Ball Spin: Mid/Low Spin

SWING SPEED

Suggested Flex Selection by Swing Speed:

Regular Flex – Generally 80-95 mph.

Stiff Flex – Generally 96-105 mph.

X-Stiff Flex – Generally 106-115 mph.

MADE IN THE USA

Each handcrafted Penley Golf Shaft is designed, manufactured and built in the USA at our factory in San Diego, California. Carter Penley designs and oversees all manufacturing of Penley Shafts. You can be assured that each shaft designed by Carter Penley will always be the best, most consistent quality shaft you will ever purchase.

 

OUR TECHNOLOGY

TBAR™ (Tip to Butt Aspect Ratio) is a proprietary manufacturing process developed by Penley that produces the tightest most exacting tolerances from model to model, flex to flex, shaft to shaft.

Zone Flex™ Characterization – is another process developed by Penley utilizing the TBAR™ algorithm that simplifies fitting a player. These customized Zone Flexes are performance matched to an individual players’ needs.

The TBAR™ algorithm, combined with our Zone Flex™ Characterization results in a shaft that is tuned to fit the player, not the player having to fit the shaft- giving the player greater versatility and customization and is built into every one of our shaft models.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

For those that need a a different, more specific tuned shaft for their needs (such as higher/lower launch), review the Zone Flex Characterization Chart or click on the image below to fill out our online fitting form:

 

]]> https://penleysports.com/product/penley-stealth-shaft/feed/ 0 Penley ET2 Pro Tour Series Shaft https://penleysports.com/product/penley-et2-pro-tour-series-shaft/ https://penleysports.com/product/penley-et2-pro-tour-series-shaft/#respond Thu, 27 Apr 2023 01:06:00 +0000 https://penleysports.o4sdesign.com/?post_type=product&p=21970 ENERGY TRANSFER IS PART OF OUR GAME.
DESIGN DRIVERS
The new ET2 PRO TOUR SERIES is designed for improved performance while maintaining the exceptional feel and playability as its tour proven predecessor, the ET2. Designed with a stiffer tip to produce a lower launch and lower spin rates, the ET2 PRO TOUR SERIES shaft is ideal for the stronger, more aggressive player that is looking for a high performance shaft with a highly responsive feel. Enhanced with TBAR™ and Zone Flex™ Characterization - proprietary processes developed by Penley that no other shaft manufacturer practices. This process results in a shaft that is tuned to fit the player, not the player having to fit the shaft. As part of the Energy Transfer Accelerance line of shafts, the primary design drivers of the ET2 PRO TOUR SERIES is: FEEL, CONTROL & DISTANCE. This shaft has it all. The ET2 PRO TOUR SERIES is only available to consumers as a READY2PLAY option. View the ET2 PRO TOUR SERIES Specifications
 ]]> PENLEY ET2 PRO TOUR SERIES
SHAFT SPECS
ET2 PRO TOUR SERIES SHAFT SPECS
FLEX WEIGHT LENGTH TIP DIA. BUTT DIA. TORQUE TBAR
R 70g 46 0.335 0.600 4.0 7.2/4.2
S 70g 46 0.335 0.600 3.5 8.1/5.1
X 70g 46 0.335 0.600 2.9 8.8/5.9

Launch Characteristics: Mid Launch

Spin: Mid-Low Spin

Ball Flight: Mid/Low

SWING SPEED

Suggested Flex Selection by Swing Speed:

Regular Flex – Generally 80-95 mph.

Stiff Flex – Generally 96-105 mph.

X-Stiff Flex – Generally 106-115 mph.

MADE IN THE USA

Each handcrafted Penley Golf Shaft is designed, manufactured and built in the USA at our factory in San Diego, California. Carter Penley designs and oversees all manufacturing of Penley Shafts. You can be assured that each shaft designed by Carter Penley will always be the best, most consistent quality shaft you will ever purchase.

 

OUR TECHNOLOGY

TBAR™ (Tip to Butt Aspect Ratio) is a proprietary manufacturing process developed by Penley that produces the tightest most exacting tolerances from model to model, flex to flex, shaft to shaft.

Zone Flex™ Characterization – is another process developed by Penley utilizing the TBAR™ algorithm that simplifies fitting a player. These customized Zone Flexes are performance matched to an individual players’ needs.

The TBAR™ algorithm, combined with our Zone Flex™ Characterization results in a shaft that is tuned to fit the player, not the player having to fit the shaft- giving the player greater versatility and customization and is built into every one of our shaft models.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

For those that need a a different, more specific tuned shaft for their needs (such as higher/lower launch), review the Zone Flex Characterization Chart or click on the image below to fill out our online fitting form:

]]> https://penleysports.com/product/penley-et2-pro-tour-series-shaft/feed/ 0 R2P Legends – Penley Stealth 65 Wood X Flex https://penleysports.com/product/r2p-legends-penley-stealth-65-wood-x-flex/ https://penleysports.com/product/r2p-legends-penley-stealth-65-wood-x-flex/#respond Thu, 27 Apr 2023 00:15:00 +0000 https://penleysports.o4sdesign.com/?post_type=product&p=13931 Upgrading your shaft has never been easier. Penley 'Ready2Play' - Shafts with Adjustable Adapter Sleeves – Professionally installed by Penley here in our factory. Ready for the course when you receive it from us. All Penley 'R2P' Legends shafts come with:
  • Original Penley STEALTH 65 Shaft in an X flex with proper spine alignment
  • Adjustable Adapter Sleeve accurately aligned, installed and bonded
  • Choice of  signature logo Penley Pure Grip (color options in drop-down)
  • FREE SHIPPING
  PLEASE NOTE: All Adapters in stock are Right Handed. If you need a Left Handed sleeve, or specific length, please add it to the Order Notes section located on the Checkout Page. *Due to the limited availability of the Legends Series Penley Shafts, these shafts are final sale and cannot be returned.  ]]> The Stiff-Tip, Extended-Axis, Low-Torque, High-modulus (STEALTH) graphite shaft that consolidates all the qualities expected from the game’s top players into one high-performance shaft.

Engineered for the better player and exclusively designed for Golfsmith, this lightweight shaft and stiffer tip helps maximize distance and accuracy.

Flex: X

Tip Diameter: .335

 

Stealth 65 Unique Shaft Specifications

SHAFT TYPE FLEX KICK POINT WEIGHT
 TORQUE
 LENGTH
 TIP BUTT SWING SPEED
STEALTH 65 Wood X Mid 68 gram 3.0 47″ 0.335 0.600 95-110

The STEALTH 65 shaft comes in an X (Extra Stiff) flex and installed with your choice of the following Adjustable Sleeves in stock:

  • CALLAWAY Epic/ Rogue/ XR/ GBB – adjustable adaptor sleeve with .335 tip (compatible with: Callaway OptiForce 440, OptiForce 460, 2014 Big Bertha, Big Bertha Alpha (both 815 and 816 models), X2 Hot, X2 Hot Pro, 2014 V Series, XR Series, XR 16 Series, Callaway Epic, Epic Sub Zero, Epic Flash & Epic Flash Sub Zero)
  • COBRA BiO Adjustable Sleeve for driver 9-12 degree with 335 tip – compatible with Cobra F9 Speedback, F8, F7, King LTD, F6, Fly Z, Bio Cell
  • COBRA Universal (compatible with: COBRA KING SPEEDZONE, F9, F8, F8+, F7, F7+, KING LTD, F6, F6+, FLY-Z, FLY-Z+, BiO CELL AND BiO CELL+ DRIVERS)
  • PING G/ G30/ G400 (compatible with PING: G SERIES, G30 & G400 DRIVERS & WOODS)
  • PING G410 – Compatible with the Ping G410 driver
  • TAYLORMADE  M/ R15/ SLDR/ RBZ Stage 2/ Jetspeed – 2 degree Adjustable Sleeve with .335 tip (compatible with: M1, M2, M3,M4, M5, M6 as well as SLDR, RBZ Stage 2 JETSPEED & ADAMS XTD Ti)
  • TITLEIST TS, 917, 915, 913, 910  – Adjustable Sleeve compatible with the Titleist TS1, TS2, TS3, TS4, 917, 915 Driver, 913, 910 D2 D3 Drivers and Fairway Woods. Fits .335 Shaft tip
  • TAYLORMADE RBZ Stage 2– 1.5 degree Adjustable Sleeve with .335 tip (fits SLDR, JETSPEED, and ADAMS XTD Ti. Also fits R1)
]]> https://penleysports.com/product/r2p-legends-penley-stealth-65-wood-x-flex/feed/ 0 ET3LD Long Drive 4X https://penleysports.com/product/et3ld-long-drive-4x/ Thu, 27 Apr 2023 00:07:18 +0000 https://penleysports.o4sdesign.com/?post_type=product&p=11934 PENLEY ET3LD LONG DRIVE SHAFT

Designed for strong, powerful hitters that require extreme distance and control, especially in Long Drive Competitions.

The ET3LD shaft is ideal for:

  • Strong, powerful hitters that require extreme distance and control – particularly Professional Long Drive competitors as well as aspiring Long Drive Competitors.
  • Accommodates lower head lofts typically used in Long Drive Competitions
  • Competition fairway accuracy – tighter dispersion means more shots staying within the Grid – a must for all Long Drive Competitors
DESIGN DRIVERS

Fully advancing and applying the TBAR algorithm for the Long Drive shaft design. The ET3LD shaft has been upgraded and improved as well as upgrading the material used, plus geometry changes resulting in a tighter, more accurate shot placement. As well as:

  • Smoother load transition throughout the neutral axis, yielding a tighter dispersion – means more competition fairway accuracy
  • Maximum Load Transition to improve distance, accuracy and performance
  • Accommodates lower head lofts generally used in Long Drive events.
  • The tightest, most accurate manufacturing tolerances of any golf shaft manufacturer in the industry.

Although not technical in application, the ET3LD shaft gets a cosmetic upgrade: the ET3LD is gloss black and decorated with a brilliant white pearlescent sleeve unique to the Long Drive model.

HANDCRAFTED WITH PRECISION

All ET3LD shafts are rolled and ground with handcrafted precision practiced by no other known manufacturer. Mr. Penley himself oversees the manufacturing and quality control of each and every Long Drive shaft.

SMALL LOT NUMBERED PRODUCTIONS

The ET3LD shafts are produced in small lots of 20 or less per flex range and are individually numbered per each lot produced.

SHAFT SPECS
ET3LD LONG DRIVE
FLEX WEIGHT
 LENGTH
 TIP DIA. BUTT DIA.
 TORQUE
 TBAR*
(+/- 5g) (+/- .5 in) (+/- .005 in) (+/- .005 in)
XXXX 85g 49″ 0.335″ 0.595″ 3.6° 11.5/8.5

Kick (Bend Point): See TBAR*

Ball Flight (Trajectory): Mid/High

WHO SHOULD PURCHASE THE ET3LD LONG DRIVE SHAFT?

The ET3LD shaft is ideal for:

  • Strong, powerful hitters that require extreme distance and control – particularly Professional Long Drive competitors as well as aspiring Long Drive Competitors.
  • Those looking for a shaft to accommodate lower head lofts typically used in Long Drive Competitions
  • Competition fairway accuracy – tighter dispersion means more shots staying within the Grid – a must for all Long Drive Competitors
NOT SURE WHICH PENLEY SHAFT IS FOR YOU?
SWING SPEED

Suggested Flex Selection by Swing Speed:

X – Generally 115-135+ mph. STRONG, AGGRESSIVE tempo

2X – Generally 135-145+ mph.

3X – Generally 150+ mph.

4X – Generally 150+ mph.

NOTE: Swing speed average may vary based on individual swing tempo and timing.

* The TBAR (Tip to Butt Aspect Ratio) Algorithm is the determining flex factor, although we do apply common flex range description to help players determine which golf shaft is best suited for their level of play.

All Penley shafts are designed primarily to meet the 1 (mid-range) of each shaft flex and fits approximately ~60% of players.

NOTE: Carter Penley developed specific Zone Flexes for the professional level player (PGA, LPGA, Long Drive and aspiring amateurs) and denotes those flexes as ‘Zone Flex Characterizations’.
Players of this level may want to contact the factory to determine if the production mid-range TBAR shaft is suitable for their specific swing.

For those that need a a different, more specific tuned shaft for their needs (such as higher/lower launch), review the Zone Flex Characterization Chart or Contact Penley directly.

NOTE: Due to the extreme use, All ET3LD Long Drive Shafts are precision built on custom engineering orders only and built in small lots of 20 or less at a time.

Still have questions? Contact Us– We will be happy to help answer any questions you may have.

 

MADE IN THE USA

Our shafts are designed, manufactured and built right here in San Diego, California. Carter Penley designs and oversees all manufacturing of Penley Shafts. You can be assured that each shaft designed by Carter Penley will always be the best, most consistent quality shaft you will ever purchase.

]]>