Hybrid Heater2 Shaft

$130.00

An upgrade from the original Penley Hybrid Heater, the Hybrid Heater2 was originally designed for Tour use, working with two major OEM Tour Vans (Adams Golf & TaylorMade) in the testing and design process.

HH2 DESIGN DRIVERS

Ball trajectory is vital. A high trajectory (ballooning) leaves the player short, and a low (flat) trajectory gives the player too much roll, overshooting the green. The better ball strike is one that launches the ball a few degrees higher than the loft of the head and carries 80% of the distance to the target and then drops at a 50 to 55 degree angle to the target surface with virtually a soft impact and very little roll, allowing the player to achieve their desired distance with accuracy and confidence with every strike.

The Hybrid Heater 2 is approved and available as a Custom Order upgrade through Nike Golf, and approved by several OEM’s custom upgrade for Tour and consumers.

Flex

Clear

-Decrease product quantity. +Increase product quantity.

SKU: HH2 Category: Shafts

PENLEY HYBRID HEATER 2 Pro Series

HYBRID HEATER2 DESIGN THEORY:

Increase shaft weight over original 80 gram model
Higher kick point to keep the ball from ballooning to accommodate USGA groove rules
Incorporate “Tip to Butt Aspect Ratio” (TBAR) to stabilize shaft integrity for maximum accuracy and “FEEL”.

The Hybrid Heater 2 takes the original Hybrid Heater to the next level and allows the player to achieve their desired distance with accuracy and confidence with every strike. Penley shafts are designed to improve the players ball striking ability.

SHAFT SPECS

HYBRID HEATER 2 SHAFT SPECS
FLEX	WEIGHT	LENGTH	TIP DIA.	BUTT DIA.	TORQUE	TBAR MATCHED
R	90g	41.5″	0.370″	0.600″	2.5	YES
S	90g	41.5″	0.370″	0.605″	2.5	YES
X	90g	41.5″	0.370″	0.605″	2.5	YES

Kick (Bend) Point: Mid/High

Ball Flight: Mid/Low

WHO SHOULD PURCHASE THE HH2?

A player that is looking for a standalone hybrid shaft and who is endeavoring to improve their ball striking ability, carrying distance and accuracy.

The Hybrid Heater2 was developed with a higher kick point to keep the ball from ballooning to accommodate USGA groove rules. If you want a hybrid shaft that gives you the best ball trajectory and avoiding ballooning or overshooting the green, then the Hybrid Heater2 is for you.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

Suggested Flex Selection by Swing Speed:

R – Generally 80-95 mph. – slower tempo

S – Generally 96-105 mph. – mid tempo

X – Generally 106-115 mph. – fast tempo

Still not sure? Contact Us. We will be happy to help answer any questions you may have.

MADE IN THE USA

Our shafts are designed, manufactured and built right here in San Diego, California. Carter Penley designs and oversees all manufacturing of Penley Shafts. You can be assured that each shaft designed by Carter Penley will always be the best, most consistent quality shaft you will ever purchase.

OUR TECHNOLOGY

TBAR™ (Tip to Butt Aspect Ratio) is a proprietary manufacturing process developed by Penley that produces the tightest most exacting tolerances from model to model, flex to flex, shaft to shaft.

Zone Flex™ Characterization – is another process developed by Penley utilizing the TBAR™ algorithm that simplifies fitting a player. These customized Zone Flexes are performance matched to an individual players’ needs.

The TBAR™ algorithm, combined with our Zone Flex™ Characterization results in a shaft that is tuned to fit the player, not the player having to fit the shaft- giving the player greater versatility and customization and is built into every one of our shaft models.

NOT SURE WHICH PENLEY SHAFT IS FOR YOU?

For those that need a a different, more specific tuned shaft for their needs (such as higher/lower launch), review the Zone Flex Characterization Chart or click on the image below to fill out our online fitting form:

Flex	R1, S1, X1

Reviews

There are no reviews yet.

Be the first to review “Hybrid Heater2 Shaft”